home *** CD-ROM | disk | FTP | other *** search
- In article <CMCoIw.2uw@iat.holonet.net> bmccarty@zen.holonet.net (Brad McCarty) writes:
- >Apparently I'm one of the few who can't get Trumpet Winsock Internal SLIP
- >to work. When I start up TCPMAN all that happens is my modem's TX lcd
- >flashes a few times and then after about 10 secs I get the message "Unable
- >to load TCP". In the setup I've specified internal slip, com port 2, baud
- >rate 19200 (I've tried other baud rates unsuccessfully) and hardware
- >handshaking. I'm using a
- >Practical Peripherals PM14400FXSA modem. Winsock version is alpha #18
- >I've check the DOS PATH and the trumpet directory is there. Are there
- >particular modem settings I need? I've tried a variety of different
- >combinations already.
-
- Hmmm. I have almost exactly that same set up and had no
- problem setting things up. At least, on the PC end.
-
- The only differences are that I specified 57600 for the
- baud and (I think) I turned off hardware handshaking (no
- good reason, I will be tinkering with it now that I have
- things working.)
-
- I had some serious problems with the login.cmd script that
- required repeated calls with Procomm+ to see just what the
- interchange should be. That's the only thing I can think
- of that is different from what you report.
-
-
- --
- Mike Lipsie (work) mlipsie@ca.merl.com
- Mitsubishi Electric Research Laboratory (home) mikel@dosbears.UUCP
- From news@bigblue.oit.unc.edu Wed Mar 9 14:24:03 1994
- Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
- id AA19409; Wed, 9 Mar 1994 19:58:14 -0500
- Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
- id AA13095; Wed, 9 Mar 1994 19:57:02 -0500
- Received: from GATEWAY by bigblue with netnews
- for winsock@sunsite.unc.edu (winsock@sunsite.unc.edu)
- To: winsock@sunsite.unc.edu
- Date: Wed, 9 Mar 1994 14:24:03 GMT
- From: billw@coe.unomaha.edu (Bill Wilson)
- Message-Id: <billw.141.2D7DDC02@coe.unomaha.edu>
- Organization: College of Education
- Sender: ses
- Subject: Trumpet News: Mail Port Question
-
- How can I configure trumpet news so I can retrieve mail on a specific port?
-
-
-
-
-
- ****************************************************************************
- _
- _______________________ ________.--'-`--._____ Bill Wilson
- |____==================_) \_'===================` Technology Corrdinator
- _,--___.-|__|-.______|=====/ `---' University of Nebraska
- `---------._ ~~~~~|
- `-._ - - - ,' voice: (402) 554-3483
- \_____,-' fax: (402) 554-2722
-
- email: billw@coe.unomaha.edu
-
- ****************************************************************************
-
-